Kobe Red Line FDP500, Air Drill, Air

Kobe Red Line FDP500, Air Drill, Air, 500rpm, Keyed, 1.5 to 13mm, 1/4in., 336W

FPD500 Suitable for high torque drilling applications as well as screwdriving, hole sawing and cylinder honing. Rubber handle provides grip and operator comfort. 1/2″ chuck. Adjustable side handle. Short gear case design. Heavy duty gearing system with oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Spindle thread: 3/8″ – 24. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Air pressure: 90psi/6.2bar. Air consumption: 4cfm (113 L/min)*. Sound pressure level: 89dBA. Sound power level: 101dBA. Vibration level: 0.4m/s². Overall length: 240mm.

*Based on a 15 second cycle per minute average use.

Notes

  • A replacement chuck key is also available (KBE2800128A)

Kobe Red Line DAR1510, Air Drill

Kobe Red Line DAR1510, Air Drill, Air, 1,800rpm, 10mm, Keyed, 1/4in., 224W

This reversible 10mm angle air drill boasts a 10mm Jacobs chuck, fingertip control of reverse action, a rear exhaust and a 3/8in. – 24 spindle thread. The robust construction makes the angle drill suited for industrial applications.

Features and Benefits

  • Can be reversed easily with fingertip control
  • Robust construction
  • Rear exhaust
  • Safety lever for user protection
  • Supplied with chuck key

Typical Applications

  • Construction
  • Automotive

Kobe Red Line DPR1810, Air Drill, Air

Kobe Red Line DPR1810, Air Drill, Air, 2000rpm, Keyed, 1 to 10mm, 1/4in., 373W

DPR1810 10mm Jacobs chuck, stall resistant, heavy-duty bearings, thumb switch for reverse, suitable for screwdriving.

Features and Benefits

  • Stall resistant
  • Easy to operate
  • Highly durable

Technical Information Spindle: 3/8″- 24. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90psi/6.3bar. Air consumption: 4cfm* (113ltr/min). Sound pressure level: 85dBA. Sound power level: 101dBA. Vibration level: 5.4m/s². Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Kobe Red Line DP2610, Air Drill

Kobe Red Line DP2610, Air Drill, Air, 2600rpm, Keyed, 1 to 10mm, 1/4in., 447W

DP2610 10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears

Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″(10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90PSI/6.3Bar. Air consumption: 4cfm* (113 ltr/min). Sound pressure level: 100dBA. Sound power level: 103dBA. Vibration level: 2.5m/s2. Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

Operation Hour

E-MAIL

Tel

LINE QR Code

Copyright ©2025
Asia Kendy Co., Ltd. All Rights Reserved