FPD500 Suitable for high torque drilling applications as well as screwdriving, hole sawing and cylinder honing. Rubber handle provides grip and operator comfort. 1/2″ chuck. Adjustable side handle. Short gear case design. Heavy duty gearing system with oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Spindle thread: 3/8″ – 24. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Air pressure: 90psi/6.2bar. Air consumption: 4cfm (113 L/min)*. Sound pressure level: 89dBA. Sound power level: 101dBA. Vibration level: 0.4m/s². Overall length: 240mm.

*Based on a 15 second cycle per minute average use.

Notes

• A replacement chuck key is also available (KBE2800128A)

The post Kobe Red Line FDP500, Air Drill, Air appeared first on Asia Kendy Co., Ltd.

This reversible 10mm angle air drill boasts a 10mm Jacobs chuck, fingertip control of reverse action, a rear exhaust and a 3/8in. – 24 spindle thread. The robust construction makes the angle drill suited for industrial applications.

Features and Benefits

• Can be reversed easily with fingertip control
• Robust construction
• Rear exhaust
• Safety lever for user protection
• Supplied with chuck key

Typical Applications

• Construction
• Automotive

The post Kobe Red Line DAR1510, Air Drill appeared first on Asia Kendy Co., Ltd.

DPR1810 10mm Jacobs chuck, stall resistant, heavy-duty bearings, thumb switch for reverse, suitable for screwdriving.

Features and Benefits

• Stall resistant
• Easy to operate
• Highly durable

Technical Information Spindle: 3/8″- 24. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90psi/6.3bar. Air consumption: 4cfm* (113ltr/min). Sound pressure level: 85dBA. Sound power level: 101dBA. Vibration level: 5.4m/s². Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

The post Kobe Red Line DPR1810, Air Drill, Air appeared first on Asia Kendy Co., Ltd.

DP2610 10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears

Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″(10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90PSI/6.3Bar. Air consumption: 4cfm* (113 ltr/min). Sound pressure level: 100dBA. Sound power level: 103dBA. Vibration level: 2.5m/s2. Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

The post Kobe Red Line DP2610, Air Drill appeared first on Asia Kendy Co., Ltd.

DP2210 10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2″ HP motor, 3/8″ – 24 spindle thread.

Features and Benefits

• Featuring stall resistance
• Teasing throttle
• Durable, heavy duty bearings

Specifications: Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″(10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90PSI/6.3Bar. Air consumption: 4cfm* (113 ltr/min). Sound pressure level: 85dBA. Sound power level: 101dBA. Vibration level: 1.5m/s². Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

The post Kobe Red Line DP2210, Air Drill appeared first on Asia Kendy Co., Ltd.

FCT076 Reversible cut off tool – boasting class-leading ease of use and performance. Supplied with one 76mm cutting disc (230-002).

Features and Benefits

• Powerful 0.5HP motor with speed regulator for excellent power and consistency
• Safety release throttle is easy to use and ultra safe
• Rear exhaust, rotating air inlet, and a reverse feature to allow sparks to be deflected away from the work
• Ball bearing construction provides a long tool life

Typical Applications

• For cutting auto panels, light sheet metal, fibreglass, nuts and bolts

Notes Disc size: 76 x 1.8 x 9.6mm (3″ x 1/16″ x 3/8″). Minimum air hose size (ID): 3/8″ (10mm). Air inlet thread: 1/4″ NPT. Air pressure: 90psi/6.2bar. Air consumption: 4cfm*. Sound pressure level: 98dBA. Sound power level: 103dBA. Vibration level: 0.5m/s2. Overall length: 185mm.

*Based on a 15 second cycle per minute average use.

The post Kobe Green Line FCT076, Angle Grinder appeared first on Asia Kendy Co., Ltd.

The KHRN01 Air Rivet Nut Tool is ideal for efficient rivet nut installation in various assembly applications. Its ergonomic pistol grip ensures comfortable handling and reduced fatigue, while the lightweight design allows for easy use in tight spaces. The air-powered mechanism provides consistent power for fast, precise results, supporting rivet nut sizes M4 to M12. It boats a one-step rocker trigger, adjustable stroke, and dual-sided air inlet for versatile control. Durable and reliable, it’s perfect for garages, workshops, and industrial use, and comes with a storage case, oiler, hex wrenches, and multiple rivet nut heads.

Features and Benefits

• Comfortable pistol grip design to minimise hand fatigue
• Compact, lightweight build enables use in confined spaces
• Air-powered operation ensures steady performance and quick installation
• Compatible with a range of rivet nut sizes from M4 to M12, offering versatility
• One-step rocker trigger with adjustable stroke for customisable control
• Air inlet on both left- and right-hand side for ease of operational control
• Robust construction for consistent use in tough conditions
• Supplied in a convenient storage case

Contents

• Oiler
• 5mm Hex Wrench
• 2mm Hex Wrench
• 10×11 Wrench
• 27×30 Wrench and Rivet nut heads: M4, M5, M6, M8, M10, M12

Standards

• BS EN ISO 12100:2010
• BS EN ISO 11148-1:2011
• BS EN ISO 15744:2008
• BS EN ISO 20643:2008+A1:2012

The post AIR RIVET NUT TOOL appeared first on Asia Kendy Co., Ltd.