Ergonomically designed with operator friendly features this short body and 115° angle head allows access into hard to reach areas. The composite rubber body provides improved user grip and comfort over longer periods of use.

Features and Benefits: ■ 115° angle head for flexibility in confined areas ■ Ball bearing construction for longer life and smoother running ■ Safety release throttle prevents accidental start-ups ■ Speed Regulator for precise speed control ■ Rear exhaust directs away from the workpiece ■ Vibration dampened rubber body provides improved user grip and comfort over longer periods of use.

Typical Application: ■ For use on grinding, polishing, buffing and deburring ■ Ideal for cleaning, Smoothing welds seams and castings ■ Maintenance applications

Recommended Consumables ■ Tungsten Carbide Burrs ■ Mounted Points ■ Flap Wheels ■ Abrasive Bands

Note: Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable

The post Kobe Green Line FDG115 115° Angle Die Grinder appeared first on Asia Kendy Co., Ltd.

FPD500 Suitable for high torque drilling applications as well as screwdriving, hole sawing and cylinder honing. Rubber handle provides grip and operator comfort. 1/2″ chuck. Adjustable side handle. Short gear case design. Heavy duty gearing system with oil-less bushing. Spring loaded rotor vanes. Rear exhaust. Ball bearing construction for a long tool life. Spindle thread: 3/8″ – 24. Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″ (10mm). Air pressure: 90psi/6.2bar. Air consumption: 4cfm (113 L/min)*. Sound pressure level: 89dBA. Sound power level: 101dBA. Vibration level: 0.4m/s². Overall length: 240mm.

*Based on a 15 second cycle per minute average use.

Notes

• A replacement chuck key is also available (KBE2800128A)

The post Kobe Red Line FDP500, Air Drill, Air appeared first on Asia Kendy Co., Ltd.

Ultra-effective random orbital sander that provides power in a small, efficient form factor. Comes with a convenient and durable blow-moulded carry case to neatly store the sander and its wide array of accessories, which are listed below.

Features and Benefits

• Compact and lightweight for easy access in restricted areas
• Rubber handle provides grip and operator comfort
• Two finger throttle for easier control with less fatigue
• Adjustable power regulator to match the speed to the task
• Silenced handle exhaust directs the air away from the work piece
• Ball bearing construction for a long tool life

Typical Applications

• Ideal for sanding, polishing, buffing and deburring applications
• Perfect for the blending, shaping and smoothing of body filler

Contents

• 10x 2″ each sand papers (Grits 320, 400, 600)
• 10x 3″ each sand papers (Grits 320, 400, 600)
• 1x 2″ backing pad
• 1x 3″ backing pad
• 1x spindle key

Notes

• Uses both 50 and 75mm backing pads (M6x1.0mm thread)

The post Kobe Green Line FOS003, Orbital Sander, Air appeared first on Asia Kendy Co., Ltd.

Professional extended air die grinder suitable for use on a wide range of applications with an extended spindle for extra reach in “hard to get at” areas

Features and Benefits

• Extended spindle allowing two-handed operation
• Safety release throttle prevents accidental start-ups
• Front exhaust blows away dust and debris
• Fitted with long collet nut
• Supplied with two collet spanners and a comprehensive instruction manual

Typical Applications

• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes

• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables – Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

The post Kobe Red Line GES2506L 6.0mm Extended Spindle Die Grinder appeared first on Asia Kendy Co., Ltd.

DP2610 10mm Jacobs chuck, stall resistant, directional front exhaust, hammer finish casing, needle bearing gears

Air inlet thread: 1/4″ NPT. Minimum air hose size (ID): 3/8″(10mm). Chuck capacity: 10mm. Spindle thread: 3/8″ – 24. Air pressure: 90PSI/6.3Bar. Air consumption: 4cfm* (113 ltr/min). Sound pressure level: 100dBA. Sound power level: 103dBA. Vibration level: 2.5m/s2. Overall length: 180mm.

*Based on a 15 second cycle per minute average use.

The post Kobe Red Line DP2610, Air Drill appeared first on Asia Kendy Co., Ltd.

This range of industrial roller cabinets feature a modern design that’s sturdy, stylish and secure. This range has been made with the heavy industrial user in mind. It features full width top chests and full height cabinets with alloy style castors. Made from robust steel with inner walls and reinforced back panels, all units are finished with anti-rust and solvent resistant powder coat paint. All corners are angled to maintain product shape and offer cabinet protection during repositioning. This range features fully opening drawers with classic design pulls to allow easy access.

Features and Benefits

• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories
• Steel inner walls for added strength and extra rigidity
• Non-slip EVA top mat and liners prevent damage and protect tools
• Fully opening drawers with magnets to secure them in place
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Greater security due to the locking system with cylinder locks
• Increased mobility thanks to the strong ergonomic side handle, which can fit to either side of the unit to facilitate easy repositioning
• 125mm diameter castors with lockable brakes absorb shock and can support heavy loads
• Enhanced safety via the spring loaded catches prevent drawers opening when repositioning
• Available in varying sizes to suit your requirements

Typical Applications

• Workshops
• Garages
• Industrial

The post RED-28″ 5 DRAWER ROLLER CABINET appeared first on Asia Kendy Co., Ltd.

The Kennedy® Mechanics Torque Wrench combines precision with durability, featuring a chrome-plated finish and a polished steel head for a sleek, long-lasting design. Its retractable torque setting lever ensures effortless adjustments, while the “Click & Snap” mechanism provides a clear, audible signal when the desired torque is reached, enhancing accuracy and control. The push-through square drive connector allows for instant reversal, making operation quick, smooth, and efficient. Ideal for professional and DIY use, this torque wrench delivers reliable performance with every use.

Features and Benefits

• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate

Standards

• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789

The post 3/4 SQ. DR. MECHANICS TORQUE WRENCH appeared first on Asia Kendy Co., Ltd.

The Kennedy® Mechanics Torque Wrench combines precision with durability, featuring a chrome-plated finish and a polished steel head for a sleek, long-lasting design. Its retractable torque setting lever ensures effortless adjustments, while the “Click & Snap” mechanism provides a clear, audible signal when the desired torque is reached, enhancing accuracy and control. The push-through square drive connector allows for instant reversal, making operation quick, smooth, and efficient. Ideal for professional and DIY use, this torque wrench delivers reliable performance with every use.

Features and Benefits

• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate

Standards

• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789

The post Kennedy 3/8 in. Clicking Torque Wrench appeared first on Asia Kendy Co., Ltd.